Crushing of industrial and hazardous wastes
Burning problems of uncrushed materials:
1. The material is too large and too long, and the feed size is larger than the kiln mouth size, so it cannot be burned in the kiln;
2. Insufficient incineration of large materials into the kiln, reducing the incineration efficiency;
One stop elevator + crusher + fire fighting system equipment. Solve the problem of pretreatment before incineration, realize the uniformity of material particle size, and facilitate the transportation and incineration of subsequent materials.
① Break large pieces of material into small pieces
② Solve the problem that large materials cannot be fed and blocked.
Convenient material transportation:
① Uniform material size after crushing
② Convenient for grab or conveyor conveying
③ It is convenient for mixing and conveying of rear mixer and solid pump
Characteristics of hazardous waste crushing system
※ driven by imported hydraulic system, it can crush full barrels of materials.
※ imported hydraulic components are adopted, and the maximum working pressure is 35MPa.
※ automatic overload protection to protect key components from damage.
※ European imported cutting tools, broken metal does not break.
※ the tool can be repaired by surfacing to reduce the use cost.
※ the bearing has four seals, which is suitable for complex working conditions.
※ automatic fire fighting system to ensure the safe operation of the system.
※ repair the displacement guide rail to ensure the safety of workers repairing the cutter box.
※ hydraulic discharge door to reduce the labor intensity of workers.
※ the hydraulic press can crush hard materials without slipping.
※ Siemens Schneider components ensure the stability of equipment operation.